SSB-Ⅲ-2000 Shear Beam Load Cell

$188.00

SSB-Ⅲ Series Load Cell are used for concrete raw materials weighing.

SSB-Ⅲ Series Shear Beam Load Cell

Introduction:

Load cells are used for concrete raw materials weighing, installed on the weighing hopper. The mixing station is usually distinguished from the installation method for two kinds: S-load cell and shear beam load cell. S-load cell is often used for weighing of stone, sand, admixtures and water. While shear beam load cell is commonly used for the weighing of cement and powder external additives.

Load Cell Types

Main Advantages:

  • Use high-quality sensors for high weighing accuracy;
  • Unique structure, easy to install on various silos;
  • Three types of top plate structure(fixed, semi-floating, full-floating) can eliminate the weighing error caused by tank expansion due to thermal expansion and contraction;
  • Support bolts to prevent equipment from tipping;
  • Simple and quick installation;
  • Easy to maintain, saving downtime and maintenance time;
  • Adaptable to harsh environments.

Technical Parameters:

Rated Load:0.05,0.1,0.2,0.3,0.5,0.8,1,1.5,2,3,5t

Sensitivity:2.0±0.002mv/v

Zero Balance:1%F.S.

Total Error: ±0.02%F.S.

Operating Temp. Range: -30-+70℃

Recommended Excitation:10~12V(DC)

Material: Stainless steel

Application: Proportional scale, Hopper weigher, Packing scale

Dimensions:

SSB-Ⅲ Series Load Cell Dimensions

Installation Diagram:

SSB-Ⅲ Series Installation Diagram1

SSB-Ⅲ Series Installation Diagram 2

Brand

Suppliers